Create And Restore Backups From The Device Memory; Advanced View Window - Lightware HDMI-TPS-RX110AY Series User Manual


  
5.SoftwareControl-LightwareDeviceController
5.11.4. Create and Restore Backups from the Device Memory
HDMI-TPS-RX110AY series receivers are able to store backups in its own memory and can be recalled from
there so user does not need to save backup files to the local computer. Four slots are available for this
purpose.
You can save presets as not protected with using Save button and as protected with using the Save as protected
button. Restoring a preset select on the slot of the desired backup and click on the Apply button. You can
savepresetsfromafilefromyourlocalcomputerclickingontheUpload button and you can also save a
presetfromthedevice'smemorytoabackupfilewithusingtheDownload button. If you do not need a saved
preset any more, select it and click on the Delete button.

WARNING! Loading factory default settings will erase all presets which has been saved in the device
memory!
5.12. Advanced View Window
1
7
6
2 3
5
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AY series – User's Manual
1 LW3 protocol help
Edit mode
2
3 Warning mode
Node list
4
5 Protocol tree
6 Command line
7 Terminal window
#terminal #advancedview
4
Pushing the button results a help window opening which describes the most
importantinformationaboutLW3protocolcommandsinHTMLformat.
The default appearance is the read-only mode. If you want to modify the
valuesorparameters,ticktheoption.Youwillbepromptedtoconfirmyour
selection.
If this pipe checked in, a warning window pops up when you enable Edit mode.
Correspondent parameters and nodes are shown which are connected to the
selected item in the protocol tree.
Manualbutton: Manual (short description) of the node can be called and
displayed in the terminal window.
Savesthevalue/parametertypedinthetextbox.
Setbutton:
Calls the method, e.g. reloads factory default settings.
Callbutton:
LW3protocoltree;selectanitemtoseeitscontent.
Type the desired command and execute it by the Send button. Clear all current
commands and responses in the Terminal window by the Clear button.
Commands and responses with time and date are listed in this window. Sent
command starts with '>' character, received response starts with '<' character.
The color of each item depends on the type of the command and response.
The content of the window can be emptied by the Clear button. If the Autoscroll
option is ticked, the list is scrolled automatically when a new line is added.
51