The Built-In Miniweb; Opening The Miniweb - Lightware HDMI-TPS-RX110AY Series User Manual


  
5.SoftwareControl-LightwareDeviceController
5.10. The Built-in Miniweb
Thedefaultcontrolpageallowsthefollowings:
▪ Source selection: This block can be used to select an input or
enable/disable the Autoselect remotely e.g. from a mobile
device.
▪ Action triggers: The action trigger buttons can be used to perform
aconfiguredEventActionwithoutwaitingfortheconditionto
occur. This can be done remotely by a mobile device, too.
5.10.1. Opening the Miniweb
TheMiniwebisavailableby:
▪ Opening the web browser and typing the IP address of the desired
device in the address line,
▪ Launching the LDC, connecting to the device, navigating to
Settings/Status and pressing the Open miniweb button.
If the Miniweb exists the page will be opened. If not, the status page
will be displayed (which is also available by opening the
<IP_address>/status.html address).
The Factory Default Status Page (status.html)
#miniweb #builtinweb #web
HDMI-TPS-RX110AYseries–User'sManual
The Default Control Page Displayed in a Desktop Browser and in a Mobile Device
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
48