Settings; Modesetting; Localrs-232Parameterssettings - Lightware HDMI-TPS-RX110AY Series User Manual


  
6.LW2Programmers'Reference
6.6. RS-232 Settings
6.6.1. RS-232 Mode Setting
RS -232 mode can be set as follows. See more details about RS -232 modes in the
#rs232 #rs-232 #serial #commandinjection #protocol
Command and Response
ȩ {RS232=<mode>}
Ȩ (RS232=<mode>)CrLf
Parameters
Identifier Parameter description
<mode> RS-232 operation mode
Example
ȩ {rs232=control}
Ȩ (RS232=CONTROL)

INFO: The current RS-232 mode can be queried by the {RS232=?} command.
HDMI-TPS-RX110AY series – User's Manual
Serial Interface section.
Value Parameter value
CONTROL Control mode
CI Command injection mode
PASS Pass-through mode
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.6.2. Local RS-232 Parameters Settings
The parameters of local RS -232 port can be set as follows.
Command and Response
ȩ {RS232_LOCAL_FORMAT=<BaudRate>;<DataBit>;<Parity>;<StopBit>}
Ȩ (RS232_LOCAL_FORMAT=<BaudRate>;<DataBit>;<Parity>;<StopBit>)CrLf
Parameters
Identifier Parameter description
<BaudRate> Baud rate
<DataBit> Data bit
<Parity> Parity
<StopBit> Stop Bit
Example
ȩ {rs232_local_format=9600;8;O;X}
Ȩ (RS232_LOCAL_FORMAT=9600;8;O;X)
Explanation
LocalRS-232portissetasthefollowing:thebaudrateto9600,databitto8,paritytoodd,andstopbitis
not changed, remained 1.
INFO:
ThecurrentlocalRS-232parameterscanbequeriedbythe{RS232_LOCAL_FORMAT=?}command.
60
Value Parameter value
X No change
4800 4800
7200 7200
9600 9600
14400 14400
19200 19200
38400 38400
57600 57600
115200 115200
X No change
8 8
9 9
X No change
N None
E Even
O Odd
X No change
1 1
1,5 1,5
2 2