Network Configuration; Ip Status Query; Ip Address Query; Ip Address Setting - Lightware HDMI-TPS-RX110AY Series User Manual


  
6.LW2Programmers'Reference
6.5. Network Configuration
6.5.1. IP Status Query
Thenetworkconfigurationofthedevicecanbequeriedasfollows.#network #ipaddress #dhcp
Command and Response
ȩ {IP_STAT=?}
Ȩ (IP_STAT=<mode>;<ip_address>;<subnet_mask>;<gateway_addr>)CrLf
Parameters
Identifier Parameter description
Static IP address setting or
<mode>
DHCP (dynamic IP address)
Current IP address of the
<ip_address>
device
Current subnet mask of the
<subnet_mask>
device
Current gateway address of
<gateway_address>
the device
Example
ȩ {ip_stat=?}
Ȩ (IP_STAT=0;192.168.0.75;255.255.255.0;192.168.0.1)
Explanation
The device has a static (fix) IP address: 192.168.0.75; the subnet mask is 255.255.255.0, the gateway
address is 192.168.0.1.
HDMI-TPS-RX110AY series – User's Manual
Value Parameter value
0 Static IP address
1 DHCP
IP address (four decimal octets
separated by dots).
Subnet mask (four decimal octets
separated by dots).
Gateway address (four decimal
octets separated by dots).
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.5.2. IP Address Query
IP address can be queried as follows.
Command and Response
ȩ {IP_ADDRESS=?}
Ȩ (IP_ADDRESS=<mode>;<ip_address>)CrLf
Parameters
Identifier Parameter description
Static IP address setting or
<mode>
DHCP (dynamic IP address)
Current IP address of the
<ip_address>
device
Example
ȩ {ip_address=?}
Ȩ (IP_ADDRESS=1;192.168.2.118)
Explanation
ThedevicehasaDHCP(dynamic)IPaddress:192.168.2.118.
6.5.3. IP Address Setting
IP address can be set as follows.
Command and Response
ȩ {IP_ADDRESS=<mode>;<ip_address>}
Ȩ (IP_ADDRESS=<mode>;<ip_address>)CrLf
Parameters
Identifier Parameter description
Static IP address setting or
<mode>
DHCP (dynamic IP address)
<ip_address> IP address of the device
Example
ȩ {ip_address=1;}
Ȩ (IP_ADDRESS=1;192.168.2.118)
Explanation
The device is set to DHCP (dynamic) IP address and got 192.168.2.118.
58
Value Parameter value
0 Static IP address
1 DHCP
IP address (four decimal octets
separated by dots).
Value Parameter value
0 Static IP address
1 DHCP
IP address (four decimal octets
separated by dots).