Port Settings; Mute Output; Unmute Output; Lock Output - Lightware HDMI-TPS-RX110AY Series User Manual


  
6.LW2Programmers'Reference
6.4. Port Settings
6.4.1. Mute Output

INFO: <A/V/AV>optionusuallycanbeskippedforlegacypurposes.Inthiscase,thedeviceschangeall
(Video & Audio) layers but using status commands it displays information about only the Video layer.
PleaseuseAVoption,whenavailable.
Command and Response #mute
ȩ {#<out>·<layer>}
Ȩ (1MT<out>·<layer>)CrLf
Parameters
Identifier Parameter description
<layer> The layer of the HDMI signal
Example
ȩ {#2 A}
Ȩ (1MT02 A)
Explanation
The audio signal of the Analog audio out (02) is muted.
ATTENTION!
Muting does not change the state of the crosspoint but disables the output itself. This way
the last connection can be easily restored with an unmute command. Switching a muted output does not
unmute the output.
HDMI-TPS-RX110AY series – User's Manual
Value Parameter value
A Audio layer
V Videolayer
AV Audio and video layers together
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.4.2. Unmute Output
Command and Response #unmute
ȩ {+<out>·<layer>}
Ȩ (0MT<out>·<layer>)CrLf
Parameters
Identifier Parameter description
<layer> The layer of the HDMI signal
Example
ȩ {+1}
Ȩ (0MT01)
Explanation
The audio and video signals of the HDMI out (01) is unmuted.

INFO: Unmuting an output makes the previous connection active as the crosspoint state has not been
changed by the muting command, only the output was disabled.
6.4.3. Lock Output
Lockanoutputport.Thestateoftheoutputcannotbechangeduntilunlocking.
Command and Response #lock
ȩ {#><out>·<layer>}
Ȩ (1LO<out>·<layer>)CrLf
Parameters
Identifier Parameter description
<layer> The layer of the HDMI signal
Example
ȩ {#>1V}
Ȩ (1LO01V)
Explanation
The video signal of the HDMI out (01) is locked.
56
Value Parameter value
A Audio layer
V Videolayer
AV Audio and video layers together
Value Parameter value
A Audio layer
V Videolayer
AV Audio and video layers together