Remote Firmware Upgrade Of Connected Lightware Devices - Lightware HDMI-TPS-RX110AY Series User Manual


  
8. Firmware Upgrade
8.6. Remote Firmware Upgrade of Connected Lightware Devices
FirmwareofLightwaredevicescanbeupgradedviaanotherconnectedLightwaredevicewithoutremoving
the device from the system. It means user does not have to connect directly to the upgradable device, it can
bereachedandflashedthroughotherdevices.It'samorecomfortablewaytokeepup-to-dateyourLightware
devices.
Therearetwotypesofremoteupgrading:
Extended Upgrade
▪ IntelligentdevicescanbeupgradedviaanotherintelligentorbasicdeviceviaTPSorOPTS/OPTMlink.
▪ For example, HDMI-TPS-RX110AY series extenders can be upgraded via MMX6x2-HT series matrix or
a HDMI-TPS-TX95 extender.
Hosted Upgrade
▪ Basic devices can be upgraded only via an intelligent device via TPS link.
▪ For example, TPS 95 series extenders can be upgraded via MMX6x2-HT series matrix or
HDMI-TPS-RX110AY series extenders.
▪ In case of hosted upgrade, the procedure is almost the same as described in Firmware upgrade –
StarttheLDU2ApplicationandFollowtheSteps. The only difference is that the host device's name,
and IP address appears beside the name of the device to be upgraded.
ATTENTION!
During hosted upgrade the host device turned to bootload mode when the extender is
upgraded.Duringtheupgradenormaloperationmodeissuspended.Whentheupgradeissuccessfully
finished,thenormaloperationmodeisrestored.
HDMI-TPS-RX110AY series – User's Manual
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
101