Lockoutput; Unlockoutput; Analog Audio Output Settings; Volumesetting(Db) - Lightware HDMI-TPS-RX110AY Series User Manual


  
7.LW3Programmers'Reference
7.6.9. Lock Output
Command and Response #lock
Î CALL·/MEDIA/AUDIO/XP:lockDestination(<out>)
Í mO·/MEDIA/AUDIO/XP:lockDestination
Example
Î CALL/MEDIA/AUDIO/XP:lockDestination(O1)
Í mO/MEDIA/AUDIO/XP:lockDestination
7.6.10. Unlock Output
Command and Response #unlock
Î CALL·/MEDIA/AUDIO/XP:unlockDestination(<out>)
Í mO·/MEDIA/AUDIO/XP:unlockDestination
Example
Î CALL/MEDIA/AUDIO/XP:unlockDestination(O1)
Í mO/MEDIA/AUDIO/XP:unlockDestination
7.7. Analog Audio Output Settings
7.7.1. Volume Setting (dB)
Command and Response #analogaudio #volume
SET·/MEDIA/AUDIO/<out>.VolumedB=<level>
Î
pw·/MEDIA/AUDIO/<out>.VolumedB=<level>
Í
Parameters
<level> Sets the output volume (attenuation) between -95.625 dB and 0 dB in step of -0.375 dB. The
value is rounded up if necessary to match with the step value.
Example
Î SET/MEDIA/AUDIO/O2.VolumedB=-15
Í pw/MEDIA/AUDIO/O2.VolumedB=-15.00
HDMI-TPS-RX110AY series – User's Manual
7.7.2. Volume Setting (dB) in Steps
Command and Response
CALL·/MEDIA/AUDIO/<out>.stepVolumedB(<step>)
Î
Í mO·/MEDIA/AUDIO/<out>.stepVolumedB
Parameters
<level>
Example
Î CALL/MEDIA/AUDIO/O2.stepVolumedB(5)
Í mO/MEDIA/AUDIO/O2.stepVolumedB
7.7.3. Volume Setting (Percent)
Command and Response
SET·/MEDIA/AUDIO/<out>.VolumePercent=<percent>
Î
pw·/MEDIA/AUDIO/<out>.VolumePercent=<percent>
Í
Parameters
<level>
Example
Î SET/MEDIA/AUDIO/O2.VolumePercent=50
Í pw/MEDIA/AUDIO/O2.VolumePercent=50
7.7.4. Volume Setting (Percent) in Steps
Command and Response
CALL·/MEDIA/AUDIO/<out>.stepVolumePercent(<percent>)
Î
Í pw·/MEDIA/AUDIO/<out>.stepVolumePercent
Parameters
<level>
Example
Î CALL/MEDIA/AUDIO/O2.stepVolumePercent(15)
Í mO/MEDIA/AUDIO/O2.stepVolumePercent
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
Sets the output volume (attenuation) between -95.625 dB and 0 dB in step of -0.375 dB. The
value is rounded up if necessary to match with the step value.
Setstheoutputvolume(attenuation)between100%and0%,instepof1%.Thevalueisrounded
up if necessary to match with the step value.
Setstheoutputvolume(attenuation)between100%and0%,instepof1%.Thevalueisrounded
up if necessary to match with the step value.
77