About The Firmware Package (Lfp2 File); Short Instructions; Installation Of Ldu2; Detailed Instructions - Lightware HDMI-TPS-RX110AY Series User Manual


  
8. Firmware Upgrade
ATTENTION!
While the firmware is being upgraded, the normal operation mode is suspended as the
receiverisswitchedtobootloadmode.Signalprocessingisnotperformed.Donotinterruptthefirmware
upgrade. If any problem occurs, reboot the receiver and restart the process.
ATTENTION!
Thefirmwareupgradeprocesshasaneffectontheconfigurationandthesettingsofthe
device. For more details, please see the
8.1. About the Firmware Package (LFP2 File)
ThefirmwarefilesarepackedinanLFP2package.Youneedonlythisfiletodotheupgradeonyourdevice.
▪ Thepackagecontainsallthenecessarycomponents,binary,andotherfiles;
▪ The package also contains each firmware with version number and a list showing the compatible
devices.
8.2. Short Instructions
Step 1. GetthefirmwarepackandtheLightwareDeviceUpdaterv2(LDU2)application.
Step 2. InstalltheLDU2application.
Step 3. Establish connection between the computer and the device(s) via Ethernet.
Step 4. StartLDU2andfollowtheinstructionsshownonthescreen.
8.3. Installation of LDU2
Minimum System Requirement
RAM:1GB
Installation Modes
LDU2hastwoinstallationmodes:Normal and Snapshot.
Normal install
AvailableforWindowsandmacOS
The installer can update only this instance
Only one updateable instance can exist for all users

ATTENTION! Using the Normal install as the default value is highly recommended.
KeepingtheConfigurationSettings section before the upgrade.
Snapshot install
AvailableforWindows
Cannot be updated
More than one different version can be installed for each user
Comparison of install types
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AY series – User's Manual
Installation for Windows OS
Run the installer. If the User Account Control drops a pop-up message click Yes. During the installation you
will be prompted to select the type of the installation.
Installation for macOS
MounttheDMGfilewithdoubleclickingonitanddragtheLDU2iconovertheApplicationsicontocopythe
programintotheApplicationsfolder.IfyouwanttocopytheLDU2intoanotherlocationjustdragtheicon
over the desired folder.
INFO:
AftertheinstallationtheWindowsandthemacOSapplicationhasthesamelookandfunctionality.
8.4. Detailed Instructions
8.4.1. Establish Connection
Make sure that the computer and the device are connected over Ethernet and the connection is established
between them.
8.4.2. Start the LDU2 Application and Follow the Steps
The Steps of the Upgrade in Quick Summary:
Step 1. Selectthefirmwarepackagefile.
Step 2. Select the unit(s) for upgrading.
Step 3. Check the upgrade parameters.
Step 4. Starttheupdateandwaituntilitisfinished.
Step 5. Waituntiltheunitrebootswiththenewfirmware.
97