Subnet Mask Query; Subnet Mask Setting; Gateway Address Query; Gateway Address Setting - Lightware HDMI-TPS-RX110AY Series User Manual


  
6.LW2Programmers'Reference
6.5.4. Subnet Mask Query
IP address can be queried as follows.
Command and Response
ȩ {IP_NETMASK=?}
Ȩ (IP_NETMASK=<subnet_mask>)CrLf
Parameters
Identifier Parameter description
Current subnet mask of the
<subnet_mask>
device
Example
ȩ {ip_netmask=?}
Ȩ (IP_NETMASK=255.255.255.0)
6.5.5. Subnet Mask Setting
IP address can be set as follows.
Command and Response
ȩ {IP_NETMASK=<subnet_mask>}
Ȩ (IP_NETMASK=<subnet_mask>)CrLf
Parameters
Identifier Parameter description
<subnet_mask> Subnet mask of the device
Example
ȩ {ip_netmask=255.255.0.0}
Ȩ (IP_NETMASK=255.255.0.0)
HDMI-TPS-RX110AY series – User's Manual
Value Parameter value
Subnet mask (four decimal octets
separated by dots).
Value Parameter value
Subnet mask (four decimal octets
separated by dots).
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
6.5.6. Gateway Address Query
Gateway address can be queried as follows.
Command and Response
ȩ {IP_GATEWAY=?}
Ȩ (IP_GATEWAY=<gateway_address>)CrLf
Parameters
Identifier Parameter description
Current gateway address of
<gateway_address>
the device
Example
ȩ {ip_gateway=?}
Ȩ (IP_GATEWAY=192.168.0.1)
6.5.7. Gateway Address Setting
Gateway address can be set as follows.
Command and Response
ȩ {IP_GATEWAY=<gateway_address>}
Ȩ (IP_GATEWAY=<gateway_address>)CrLf
Parameters
Identifier Parameter description
Current gateway address of
<gateway_address>
the device
Example
ȩ {ip_gateway=192.168.0.1}
Ȩ (IP_GATEWAY=192.168.0.1)
6.5.8. Apply Network Settings
Applying the network settings and restart the network interface.
ATTENTION!
Thecommandisalwaysrequiresasthelaststepforapplyingthemodifiednetworksettings.
Command and Response
ȩ {IP_APPLY}
Ȩ (IP_APPLY)CrLf
Example
ȩ {ip_apply}
Ȩ (IP_APPLY)
59
Value Parameter value
Gateway address (four decimal
octets separated by dots).
Value Parameter value
Gateway address (four decimal
octets separated by dots).