Sendingatext(Ascii-Format)Viaserialport; Sending A Binary Message (Hex-Format) Via Serial Port; Using Hexadecimal Codes; Sendingprontohexcodesinlittle-Endianformatviairport - Lightware HDMI-TPS-RX110AY Series User Manual


  
7.LW3Programmers'Reference
7.12.8. Sending a Text (ASCII-format) via Serial Port
The command is for sending a command message in ASCII-format. This method does not allow sending
message with control and non-printable characters.
Command and Response
Î CALL·/MEDIA/UART/<port>:sendText(<message>)
Í mO·/MEDIA/UART/<port>:sendText
Example
Î CALL/MEDIA/UART/P1:sendText(open)
Í mO/MEDIA/UART/P1:sendText
The 'open' text is sent out via the P1 serial port.
7.12.9. Sending a Binary Message (HEX-format) via Serial Port
The command is for sending a command message in Hexadecimal-format. This method does not require
escaping the control and non-printable characters.
Command and Response
Î CALL·/MEDIA/UART/<port>:sendBinaryMessage(<message>)
Í mO·/MEDIA/UART/<port>:sendBinaryMessage
Example
Î CALL/MEDIA/UART/P1:sendBinaryMessage(433030)
Í mO/MEDIA/UART/P1:sendBinaryMessage
The'433030'messageissentoutviatheP1serialport.
7.12.10. Using Hexadecimal Codes
HexadecimalcodescanbeinsertedintheASCIImessagewhenusing:
sendMessage command: CALL /MEDIA/UART/P1:sendMessage(C00\x0D)
tcpMessage command: CALL /MEDIA/ETHERNET:tcpMessage(C00\x0D)
udpMessage command: CALL /MEDIA/ETHERNET:udpMessage(C00\x0D)
▪
C00:themessage.
▪
\x:indicatesthatthefollowingisahexadecimalcode.
▪
0D:thehexadecimalcode(CarriageReturn).
HDMI-TPS-RX110AY series – User's Manual
7.12.11. Sending Pronto Hex Codes in Little-endian Format via IR Port
DIFFERENCE:

Command and Response
Î CALL·/MEDIA/IR/<output_port>:sendProntoHex(<hex_code>)
Í mO·/MEDIA/IR/<output_port>:sendProntoHex
Parameters
<output_port>
<hex_code>

INFO:
lengthofthewholecodeinhexaformat.Ifthecodeisdeficientorduplicated,itcausessyntaxerror.
For more details about the pronto hex codes see
Example
Î CALL/MEDIA/IR/D1:sendProntoHex(00006D0025000300A900A80015003F0015003F0
015003F0015001500150015001500150015001500150 0150015003F0015003F001500
3F00150015001500150 015001 500150015001500150015003F0015003F0015003F00150015001500
150015001500150015001500150015001500150015001500150015003F0015003F0015003F0015003
F0015003F0015000207A900A8001500150015006E0E)
Í mO/MEDIA/IR/D1:sendProntoHex

TIPSANDTRICKS:
the Internet.
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
This feature is available only in HDMI-TPS-RX110AY-Plus model.
Identifier Parameter description
Output port of the LocalInfraoutput:D1;TPSInfraoutput:D2
Infrared interface
Accepts maximum 765 character-long code in hexadecimal
Pronto hex format
format (0-9; A-F; a-f) without space character in little-endian
code
system.
This command can send exactly one pronto hex message. The header of the IR code contains the
IR Interface
Download a code which belongs to your controlled device from a web database from
87
Parameter values
section.