Settings Menu; Status; Network - Lightware HDMI-TPS-RX110AY Series User Manual


  
5.SoftwareControl-LightwareDeviceController
5.9. Settings Menu
5.9.1. Status
The most important hardware and software related information can be found on this tab: hardware and
firmwareversion,serialnumbers,temperatures,operationtime,andvoltageinformation.Devicelabelcan
be changed to unique description by the Set button.
Built-in Miniweb
The built-in website makes possible to connect to the device, and query status information with a web
browser.Systemrequirementsforoperatingsystems:MicrosoftWindowsXP,WindowsVista,Windows7,
Windows10,macOS,Linux.Compatiblewebbrowsers:MozillaFirefox,GoogleChrome,AppleSafari.
ATTENTION!
Please be sure that the computer is in the same network as the HDMI-TPS-RX110 series
device.IfthecomputerhasmultipleEthernetconnections(forexampleWi-FiandLANconnectionsare
used simultaneously) you will have to know the IP address for the one, that is used for controlling the
receiver.
The built-in website can be easily reached by clicking the Open the miniweb button (or write the IP address of
the device in the search bar of the web browser).
The .html file of the built-in web can be changed by clicking on Choose file button. Clicking on the Reset
buttonrestoresthedefault.htmlfile.#miniweb #firmwareversion #status #devicelabel #label
Status tab in Settings menu
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AYseries–User'sManual
Identify Me Feature
Clicking on the Identify me button results the blinking of the status (in green) for 10 seconds. The feature
helps to identify the device itself in the rack shelf.
5.9.2. Network
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
#identifyme
Network tab in Settings menu
#network #dhcp #ipaddress
46