Sendingaceccommandintextformat; Sending A Cec Command In Hexadecimal Format; Relay Port Settings; Query The Connection State - Lightware HDMI-TPS-RX110AY Series User Manual


  
7.LW3Programmers'Reference
7.13.2. Sending a CEC Command in Text Format
Command and Response
Î CALL/MEDIA/CEC/<port>:send(<command>)
Í mO/MEDIA/CEC/<port>:send
Parameters
The followings are accepted as <command>:
image_view_on standby
down left
contents_menu favorite_menu
number_1 number_2
number_6 number_7
enter clear
input_select display_info
volume_up volume_down
play stop
fast_forward eject
stop_record pause_record
select_media_1 select_media_2
power_toggle power_on
f2 f3
Example
Î CALL/MEDIA/CEC/O1:send(power_on)
Í mO/MEDIA/CEC/O1:send
7.13.3. Sending a CEC Command in Hexadecimal Format
Command and Response
Î CALL/MEDIA/CEC/<port>:sendHex(<hex_code>)
Í mO/MEDIA/CEC/<port>:sendHex
Parameters
<hex_code> Accepted command is max. 30 character long (15 byte) in hexadecimal format.
Example
Î CALL/MEDIA/CEC/I1:sendHex(8700E091)
Í mO/MEDIA/CEC/I1:sendHex
ok back up
right root_menu setup_menu
media_top_menu media_context_menu number_0
number_3 number_4 number_5
number_8 number_9 dot
channel_up channel_down sound_select
power_legacy page_up page_down
mute_toggle mute unmute
pause record rewind
skip_forward skip_backward 3d_mode
play_forward play_reverse select_next_media
select_media_3 select_media_4 select_media_5
power_off stop_function f1
f4
Appliedfirmwarepackage:v1.4.0 | LDCsoftware:v2.4.0b3
HDMI-TPS-RX110AY series – User's Manual
7.14. Relay Port Settings
7.14.1. Query the Connection State
Command and Response #relay
Î GET·/MEDIA/RELAY/CTRL.Output
pr·/MEDIA/RELAY/CTRL.Output=<connection_state>
Í
Parameters
Identifier
<connection_state>
Example
Î GET/MEDIA/RELAY/CTRL.Output
Í pr/MEDIA/RELAY/CTRL.Output=C;O
P1 relay port is closed, the P2 relay port is opened.
7.14.2. Change the Connection State
Command and Response
SET·/MEDIA/RELAY/<port>.Output=<connection_state>
Î
pw·/MEDIA/RELAY/<port>.Output=<connection_state>
Í
Parameters
See at previous section.
Example
Î SET/MEDIA/RELAY/P1.Output=C
Í pw/MEDIA/RELAY/P1.Output=C
P1 relay port is set to be closed.
7.14.3. Toggle the Connection State
Command and Response
Î CALL·/MEDIA/RELAY/<port>:toggle()
Í mO·/MEDIA/RELAY/<port>:toggle
Example
Î CALL/MEDIA/RELAY/P1:toggle()
Í mO/MEDIA/RELAY/P1:toggle
The connection state of P1 port is changed to closed from opened.
Parameter description Value
O Opened
Connection state of the relay
C Closed
89
Explanation