Delta Electronics ASDA-A2 Series User Manual page 457

Call 1(800)985-6929 for Sales
Chapter 8 Servo Parameters
Setting value: 0x45
DI Name
INHP
NOTE
1) 11 ~ 17: Single control mode, 18 ~ 20: Dual control mode
2) When P2-10 to P2-17 is set to 0, it indicates input function is disabled.
8-212
Call 1(800)985-6929 for Sales
DI Function Description
Pulse inhibit input. When the drive is in position
mode, if INHP is activated, the external pulse input
command is not valid. (Please use DI8 for INHP
signal to ensure the real-time operation of INHP
function.)
deltaacdrives.com
deltaacdrives.com
sales@deltaacdrives.com
Trigger Control
Method Mode
Level
PT
Triggered
Revision January 2011
sales@deltaacdrives.com