Table Of Contents - Delta Electronics ASDA-A2 Series User Manual

Call 1(800)985-6929 for Sales
Chapter 3 Connections and Wiring
DO Signal
SDO_4
SDO_5
SDO_6
SDO_7
SDO_8
SDO_9
SDO_A
SDO_B
SDO_C
SDO_D
SDO_E
SDO_F
NOTE
1) PINS 3 & 2 can either be TSPD or HOME dependent upon control mode selected.
2) The DO signals that do not have pin numbers in Tables 3.B are not default DO signals. If
the users want to use these non-default DO signals, the users need to change the settings
of parameters P2-18 ~ P2-22. The "state" of the output function may be turned ON or OFF
as it will be dependant on the settings of parameters P2-18 ~ P2-22. Please refer to section
3.3.3 for details.
3-30
Call 1(800)985-6929 for Sales
Pin No.
Assigned
(Default)
Control
Mode
+ -
ALL - - Output the status of bit04 of P4-06.
ALL - - Output the status of bit05 of P4-06.
ALL - - Output the status of bit06 of P4-06.
ALL - - Output the status of bit07 of P4-06.
ALL - - Output the status of bit08 of P4-06.
ALL - - Output the status of bit09 of P4-06.
ALL - - Output the status of bit10 of P4-06.
ALL - - Output the status of bit11 of P4-06.
ALL - - Output the status of bit12 of P4-06.
ALL - - Output the status of bit13 of P4-06.
ALL - - Output the status of bit14 of P4-06.
ALL - - Output the status of bit15 of P4-06.
deltaacdrives.com
Details
deltaacdrives.com
sales@deltaacdrives.com
Wiring Diagram
(Refer to 3.3.4)
C5/C6/C7/C8
Revision January 2011
sales@deltaacdrives.com