Table of Contents
Advertisement
Menu Changes
(Overview)
CAL Menu
DOMAIN Menu
PARAMETER Menu
STIMULUS Menu
Operation
8510XF Operating System
The
,
,
[CAL]
[DOMAIN]
[PARAMETER]
been modified for the 8510XF, as noted briefly below.
The
menu is changed in the following areas:
[CAL]
•
is deleted.
{TRIM SWEEP}
•
The contents of the
[CAL]
name of the calibration kit that is in use, as well as the names of the
calibration standards in that kit. A calibration kit (85059A) has been
developed specifically for the 8510XF; the menu maps in
reflect the contents of that kit.
The
menu and its submenus are discussed later in this chapter (see
[CAL]
"Calibration Types" on page
The
menu is changed as follows:
[DOMAIN]
is deleted.
{PULSE PROFILE}
The
menu is changed as follows:
[PARAMETER]
is deleted.
{PHASE LOCK}
is changed in the following areas:
STIMULUS [MENU]
•
The submenu called up by the
,
{ATTENUATOR PORT 1}
{ATTENUATOR PORT 2}
deleted. Also, new port power functions are added (see
page
3-28).
•
is deleted.
{RAMP}
•
and
{COUPLED CHANNELS}
3-4 8510XF Network Analyzer Systems
,
, and
STIMULUS [MENU]
[SYSTEM]
menu (and most of its submenus) reflect the
3-13).
softkey is substantially revised.
{POWER}
, and
{POWER FLATNESS}
are deleted.
{UNCOUPLED CHANNELS}
menus have all
Chapter 7
are
"Port Power" on
Advertisement
Table of Contents
