Table of Contents
Advertisement
Checking the
Operating System
NOTE
Operation
8510XF Operating System
8510XF Operating System
In the 8510XF, the network analyzer runs a specially modified version of the
8510C operating system firmware. Some of the user menus are changed as a
result, but the majority of them remain identical to the standard 8510C
menus, as they are described in the 8510C Keyword Dictionary.
The present chapter includes information on the specific areas in which the
standard menus are changed. A complete set of menu maps for the 8510XF,
including equivalent GPIB commands, is presented in
Commands"
of this manual.
The network analyzer is capable of running either the 8510XF version or the
operating system, or the standard 8510C version. You can verify that the
correct version is installed, by using the key sequence:
[SYSTEM] {MORE} {SERVICE FUNCTIONS} {SOFTWARE REVISION}
The name of the displayed revision should begin with "8510XF," not
"8510C."
The appropriate (CRT or LCD) 8510XF version of the operating system is
installed at the factory; it can be re-loaded, if necessary, from a diskette
(Agilent part number E7340-10001) that is supplied with the system.
The appropriate (CRT or LCD) 8510C version of the operating system can
be loaded, if necessary, from a diskette supplied with the accessories to the
8510C (Agilent part number 85101-80116).
To load the operating system, use the key sequence:
{SERVICE FUNCTIONS} {TEST MENU}
and enter
[1][9] [=MARKER]
3-2 8510XF Network Analyzer Systems
to call up the main service functions menu,
to select
LOAD PROGRAM DISK
Chapter 7, "Menus &
[SYSTEM] {MORE}
.
Advertisement
Table of Contents
