Table of Contents
Advertisement
LO Power
Configuration
Figure 3-20
LO Leveling Functions
NOTE
Operation
LO Power
LO Power
LO power functions are accessed using the LO Power Configuration and LO
Power Settings menus, described below.
[SYSTEM] {MORE} {LO POWER CONFIG}
LO Power Configuration Menu, LO Power Settings Submenu,
and Equivalent GPIB Commands
The first four softkeys specify different methods of leveling for the 83621B
LO source.
If
is selected, leveling of the LO source (83621B) is
{LO LEVEL / SYSTEM}
controlled entirely by the 8510XF system. This is the normal operating
mode.
The remaining "LO LEVEL" selections are provided as a convenience for
use in unusual applications; they are not recommended for normal operation
of the 8510XF.
If
is selected, the LO source performs its own leveling,
{LO LEVEL / INTERNAL}
using an internal detector.
3-36 8510XF Network Analyzer Systems
calls up the following menu:
Advertisement
Table of Contents
