Agilent Technologies 8510XF Operating And Service Manual page 110

XF Test Set Service
Figure 3-22
Show/Hide Configuration
Leveling
Operation
Service
[SYSTEM] {MORE} {SERVICE FUNCTIONS} {XF TESTSET SERVICE}
menu:
XF Test Set Service Menu, Leveling Settings Submenu,
and Equivalent GPIB Commands
This menu includes those service functions which apply specifically to the
test set (that is, the millimeter-wave controller and the test heads), rather
than to the network analyzer.
These functions are intended to be used only by Agilent service engineers.
The first softkey toggles between two modes:
•
If
{SHOW CONFIGURATION}
hardware configuration (frequency bands, test heads, etc.) is displayed.
•
If
{HIDE CONFIGURATION}
hardware configuration is not displayed.
The softkey calls up a submenu (see
{LEVELING SETTINGS}
on page 3-41).
3-40 8510XF Network Analyzer Systems
is selected, information about the system
is selected, information about the system
calls up the following
"Leveling Settings"