Table of Contents
Advertisement
Installation
Basic System Configurations
Coaxial Configuration
Figure 2-9
shows how the instruments are installed in the rack for the coaxial
configuration. The test heads (which are placed on the work surface) are
omitted here, in order to give an unobstructed view of the rack instruments.
Figure 2-9
Rack Diagram for Coaxial Configuration
Figure 2-10 on page 2-19
shows rack cabling for the coaxial configuration.
For cabling between the millimeter-wave controller and the test heads, see
"Controller / Test Head Interconnections" on page
2-28.
2-18 8510XF Network Analyzer Systems
Advertisement
Table of Contents
