Table of Contents
Advertisement
RF Power Settings
Figure 3-18
NOTE
RF Source Power
RF Source Slope
[SYSTEM] {MORE} {RF POWER CONFIG} {RF POWER SETTINGS}
submenu:
RF Power Settings Submenu & Equivalent GPIB Commands
The functions represented on this menu will not work if
selected on the
[SYSTEM] {MORE} {RF POWER CONFIG}
Configuration" on page
3-30). These functions are not used during normal
operation of the system; they are made available for service use, or for
unusual measurement situations.
, followed by a number, specifies a power level setting for
{RF SOURCE POWER}
the 83651B RF source, in dBm.
and
{SLOPE ON}
{SLOPE OFF}
RF source.
, followed by a number, specifies the power slope
{SLOPE ON}
setting for the RF source, in dB/GHz.
menu (see
are used to enable and disable power slope for the
8510XF Network Analyzer Systems 3-33
Operation
RF Power
calls up the following
is
{RF LEVEL / SYSTEM}
"RF Power
Advertisement
Table of Contents
