"RUN CAL" Functions
If
is selected, the detector gain calibration routine is
{RUN CAL + USER PRST}
run, and is followed by a user preset.
If
is selected, the detector gain calibration routine is run,
{RUN CAL + FACT PRST}
and is followed by a factory preset.
If
is selected, the detector gain calibration routine is run,
{RUN CAL NO PRESET}
but is not followed by a preset (system settings that are altered by the
calibration routine will not be restored to their original conditions
afterward).
Use
to exit the menu without running the calibration routine.
{CANCEL}
8510XF Network Analyzer Systems 3-35
Operation
RF Power