Agilent Technologies 8510XF Operating And Service Manual page 63

Table 2-11
From Left Test Head...
LO input
b RF output [Option 005 only]
mm drive
a RF output [Option 005 only]
RF input
Bias
Controller interface
(NOTE: includes IF outputs)
Bias tee (SMB)
Test port 1 (1.0 mm)
Cable List (Connections from the Left Test Head)
To:
Millimeter-wave controller --
port 1 LO Output
Millimeter-wave controller --
port 1 RF input (b1)
Millimeter-wave controller --
port 1 mm drive
Millimeter-wave controller --
port 1 RF input (a1)
Millimeter-wave controller --
port 1 RF output
Millimeter-wave controller --
port 1 bias
Millimeter-wave controller --
port 1 test head interface
(For connection to a user-supplied voltage source. No connecting device is provided.)
(For connection to a device under test, directly or through a cable and/or wafer test probe.)
Notes Cable Type
duplicate listing 3.5 mm RF flex
duplicate listing SMA RF flex
duplicate listing 2.4 mm RF flex
duplicate listing SMA RF flex
duplicate listing 2.4 mm RF flex
duplicate listing DC
duplicate listing Multi-pin
8510XF Network Analyzer Systems 2-35
Installation
Cable List
Part No.
E7342-60004
E7342-60003
E7342-60005
E7342-60003
E7342-60005
E7342-60009
08510-60126