Tools Required
CAUTION
Figure 2-2
NOTE
Unpacking the System
•
9/16 inch wrench or adjustable-end wrench
•
Screwdriver (to pry off packing clamps)
When you remove the clamps from the packing crates, be careful not to bend
them; they may be reused when the system is repacked.
The Outer Packing Crate
The figures show a double rack crate. The unpacking procedure is essentially
the same for either a single rack or a double rack crate (differences will be
noted where they occur).
Unpacking the System
8510XF Network Analyzer Systems 2-11
Installation