Agilent Technologies 8510XF Operating And Service Manual page 73

Menu Conventions
Used in this Chapter
Figure 3-1
Softkeys
The names of softkeys are represented in italics, to distinguish them from
keys that are marked with a permanent title. For example, the sequence
means "press the
[CAL] {MORE} {SET Z }
0
softkey and the softkey."
{SET Z }
0
Menu Illustrations
In this chapter, several menus are illustrated with excerpts from the menu
maps which are shown (in their entirety) in
show both the softkeys and (to the right of the menu rectangle) the
equivalent GPIB commands, if any.
In the menu illustration below, the softkey names (as they are displayed on
the screen of the network analyzer) are shown within the rectangle; the
GPIB commands that are equivalent to these softkeys are shown to the right
of the rectangle. For example, the GPIB command "REFL" is equivalent to
the softkey
{REFLECT'N}.
Illustration of a Menu with GPIB Commands at Right
8510XF Operating System
key, followed by the
[CAL]
Chapter 7. These menu maps
8510XF Network Analyzer Systems 3-3
Operation
{MORE}