Two Versions of the
8510XF
What's Included
Frequency Limits
Partial Systems
System Description
The system is available in two basic versions, distinguished by their upper
frequency limits. The 85 GHz version is ordered as E7340A; the 110 GHz
version is ordered as E7350A.
The major components of the 8510XF system are:
•
Network analyzer, 8510C
•
Synthesized RF source, 83651B
•
Synthesized LO source, 83621B
•
Millimeter-wave controller, E7341A
•
Left test head, E7342L (85 GHz) or E7352L (110 GHz)
•
Right test head, E7342R (85 GHz) or E7352R (110 GHz)
•
1.6 meter instrument rack (E3661A)
As the list above indicates, the upper frequency limit of the system is
determined by the type of test head that is included in it.
The lower frequency limit of an 8510XF system is normally 2 GHz. With
Option 005 installed, the lower frequency limit is 45 MHz. (See
on page
1-8.)
Customers who already have the network analyzer and the sources can order
partial systems which omit those items. The partial systems are known as
millimeter-wave subsystems; the 85 GHz version is ordered as E7342A, and
the 110 GHz version is ordered as E7352A.
In addition, 8510XF upgrade kits are available for other Agilent test systems
(see
"Upgrade Paths" on page
1-10).
8510XF Network Analyzer Systems 1-5
Introduction
System Description
"Options"