Select the 60kV / 4mA then click OK. (Figure 61)
2
Setting up the computer
Click on Start, All Programs, Planmeca, Dimaxis 4.x.x. (Figure 62)
Click OK then click OK again. Select New from the bottom of the Select Image
screen.
Press Ready on the touch screen and take an exposure.
Click OK on the computer screen to evaluate the image for alignment.
2.1 Calibrating / measuring image
Click the measurement toolbar at the top. (Figure 63)
Printed copies of this document are considered uncontrolled.
22811.20.Rev001
07.31.2018
Figure 61
Figure 62
Figure 63
- 41 -
41