Planmeca ProMax Pan/Ceph Calibration Manual page 98

NOTE: image will come out as being a grey hatchet with black around it. (Figure 204)
Press the "L" key on the keyboard of the computer to give calibration lines.
This gives the point where the images are combined in the computer.
Click the magnify glass (+) to zoom in on the lines to check combination.
NOTE: There is a + / - 2 clicks left or right on the keyboard to get aligned left to right.
Printed copies of this document are considered uncontrolled.
22811.20.Rev001 07.31.2018
Figure 204
- 98 -
98