Planmeca ProMax Pan/Ceph Calibration Manual page 65

Rotate the head support to 45º position towards the front of the column and
unscrew #1. (Figure 113)
Rotate the head support to the 0º position and unscrew #2. (Figure 114)
Rotate the head support to the 45º position away from the front of the column
and unscrew #3. (Figure 115)
Printed copies of this document are considered uncontrolled.
22811.20.Rev001 07.31.2018
Figure 113
Figure 114
Figure 115
- 65 -
65