Secondary Collimator Covers; Beam Alignment - Planmeca ProMax Pan/Ceph Calibration Manual

2.2

Secondary Collimator Covers

Unscrew the 2mm screw on the bottom of the collimator cover. (Figure 119.2)
Unscrew the two 4mm screws holding the cover box to the top of the
collimator. (Figure 119.1)
3

Beam Alignment

Attach a fluorescent screen to the middle of the beam alignment tool. (Figure 120)
Printed copies of this document are considered uncontrolled.
22811.20.Rev001 07.31.2018
Figure 119
Figure 120
- 67 -
67