Arctic Cat Panther 1974 Manual page 177

SI<I D FRAME DISASSEMBL V
,- II
Note: Account for 2 bushings located in front
arm pivot points, Fig. VI -9.
Fig. VI·9
Remove Rear Arm
=quipment Necessary: 5/8-lnch Short Socket, 5/8-
Inch Wrench, 9/16-lnch Deep-Well Socket and
9/16-lnch Combination Wrench
1. Remove locknut and capscrew, Fig. VI-9, that
secures shock absorber to rear arm, using a
5/ 8-inch short socket and wrench.
Fig. VI-9
2.
,
Loosen and remove nuts, Fig. VI-10, that
secure eye bolt to eye bolt mounting flange,
using a 9/ 16-inch deep-well socket and
wrench . Repeat this step on opposite side eye
bolt.
Fig. VI·l0
3. Remove eye bolts from rear springs, Fig.
VI-ll.
Fig. VI·ll
...
---
...
4. Remove capscrew, large flat washer and
locknut that secures rear arm and springs to
rear arm mount, using a 9/16-inch socket and
wrench, Fig. VI-12.
Fig. VI·12
VI -5