Table of Contents
Advertisement
9.6.4
Replacing a PCIe holder
Upgrade and Repair Unit
(URU)
Tools:
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ If applicable,
"Removing a riser module" on page
Removing the defektive PCIe holder
Figure 108: Removing the PCIe holder (A)
▶ Press the flexible arm at both sides of the PCIe holder. Make sure the align
pin has left from the align hole of rear wall (see close-up).
RX4770 M6
Expansion cards and backup units
46.
Upgrade and Maintenance Manual
Hardware: 5 minutes
47.
48.
63.
45.
205
Advertisement
Table of Contents
