Table of Contents
Advertisement
▶ Insert the PCIe holder into the flange of the rear wall (1) and rotate it
down (2).
Figure 111: Installing the PCIe holder (B)
▶ Press the flexible arm at both sides of PCIe holder and assembly the align
pin into the align hole of rear wall (see close-up).
Concluding steps
▶ If applicable,
"Installing a riser module" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
RX4770 M6
Expansion cards and backup units
53.
59.
60.
Upgrade and Maintenance Manual
63.
61.
207
Advertisement
Table of Contents
