Figure 105: Installing the expansion card - example EP520i RAID controller
▶ Carefully insert the expansion card into the PCIe slot and press down firmly
until it is fully seated in the slot (1).
▶ Pull down the latch (2).
▶ Connect the SAS cables to the HDD backplane.
For the cable plan, see
Concluding steps
▶ If
applicable,"Installing a riser module" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
RX4770 M6
Expansion cards and backup units
"Appendix B" on page
53.
59.
60.
Upgrade and Maintenance Manual
419.
63.
61.
199