Handling The Top System Board Carrier; Removing The Top System Board Carrier - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

Installing the OCP air duct
Figure 32: Installing the OCP air duct
▶ Install the OCP air duct on the two bolts (see circles).
4.13

Handling the top system board carrier

4.13.1

Removing the top system board carrier

Remove the server out of the rack before removing the top system
board, see
▶ Remove the two riser modules, see
▶ Remove the fan cage, see
▶ Disconnect all cables from the top system board.
Hold the UPI cable by the blue latch.
RX4770 M6
4.5.3 .
"Removing the fan cage" on page
Upgrade and Maintenance Manual
Basic hardware procedures
"Removing a riser module" on page 63.
64.
73