Removing Memory Modules - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

▶
"Installing a riser module" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
For memory slots for the top system board:
▶
"Installing the air duct 1 (top system board)" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
The Optane PMem module operation mode can be configured in the
BIOS Setup. For more information, see the corresponding BIOS manual.
10.4

Removing memory modules

For memory slots valid for the bottom system board:
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver (for cover 2 and cover 3)
For memory slots valid for the top system board:
Upgrade and Repair Unit
(URU)
RX4770 M6
63.
53.
59.
60.
53.
59.
60.
Upgrade and Maintenance Manual
61.
104.
71.
61.
104.
Hardware: 20 minutes
Hardware: 5 minutes
Main memory
247