Table of Contents
Advertisement
System board and components
Replacing the iRMC microSD card
▶ Remove the defective iRMC microSD card, see
microSD card" on page
CAUTION
The iRMC microSD card contains customer information.
▶
After removing the iRMC microSD card, hand the card over to
the customer.
▶
If the customer requests disposal of the defective microSD card,
proceed as follows: Using a pair of side-cutting pliers, cut the
microSD card in half.
▶ Install the new iRMC microSD card, see
on page
346.
Concluding steps
▶
"Installing the OCP air duct" on page
▶
"Installing the top system board carrier" on page
▶
"Installing the air duct 1 (top system board)" on page
▶
"Installing the fan cage" on page
▶ Install the riser modules, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
15.6
M.2 SSD
15.6.1
Slots and bolts for M.2 SSDs
The system board offers two M.2 slots with support for 80 mm and 110 mm
long M.2 SSDs by using different latch locations. With the M.2 SSD an internal
350
348.
73.
66.
"Installing a riser module" on page
53.
59.
60.
Upgrade and Maintenance Manual
"Removing the iRMC
"Installing the iRMC microSD card"
76.
71.
61.
63.
RX4770 M6
Advertisement
Table of Contents
