Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual page 153

Table of Contents

Advertisement

Preliminary steps
"Locating the defective server" on page
▶ If
applicable,"Removing the front cover with lock" on page
"Shutting down the server" on page
"Disconnecting the power cord" on page
"Getting access to the component" on page
"Removing the air duct 1 (top system board)" on page
"Removing the fan cage" on page
▶ If applicable, remove the ODD, see
▶ Release all HDD/SSD modules and pull them out a few centimeters, see
"Removing 2.5-inch HDD/SSD modules" on page
CAUTION
The HDD/SSD modules need not to be removed.
If you want to remove them nevertheless, check if all HDD/SSD
modules are uniquely identified so that you can reinsert them
into their original bays.
Removing the ODD cage
▶ Remove the ID card.
▶ Remove the ODD, see
RX4770 M6
Hard disk drive (HDD) / solid state disk (SSD)
46.
64.
"Removing the ODD" on page
"Removing the ODD" on page
Upgrade and Maintenance Manual
97.
47.
48.
68.
145.
308.
45.
308.
153

Advertisement

Table of Contents
loading

Table of Contents