Table of Contents
Advertisement
Basic hardware procedures
The indicators also light up in standby mode and after a server restart
due to a power failure.
▶ Check the Global Error indicator and the CSS indicator.
4.1.3
Locating the defective component
After determining the error class by the CSS indicator or the Global Error
indicator, indicators on the components and onboard indicators on the system
board allow you to identify the defective component, see
error class" on page 43
For more information, see the "ServerView Suite Local Service Concept
(LSC)" manual.
Possibilities to get more information about the defective component
– Checking the ServerView System Monitor, available on Windows or Linux
based servers with ServerView agents installed.
For more information, see the "ServerView System Monitor" user
guide.
– Checking the System Event Log (SEL), see
System Event Log (SEL)" on page
– Checking the indicators on the components, see
indicators" on page
– Checking the onboard indicators on the system board using the Indicate
CSS button, see
Using the CSS button on the system board
If the system has been powered off, the onboard indicators guides you to the
defective component.
CAUTION
It is mandatory to disconnect all power cords from the system in order to
use the Indicate CSS functionality.
44
.
395.
"Using the CSS button on the system board" on page
Upgrade and Maintenance Manual
"Viewing and clearing the
101.
"Connectors and
"Determining the
44.
RX4770 M6
Advertisement
Table of Contents
