Gpu Cards In Riser Modules; Installing A Gpu Card In A Riser Module - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

Expansion cards and backup units
▶
"Resuming BitLocker functionality" on page
▶ If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced expansion card.
Configuration of network settings should be performed by the
customer. For more information, see
recovery" on page
▶ If applicable, restore LAN teaming configurations, see
upgrading LAN controllers" on page
9.8

GPU cards in riser modules

9.8.1

Installing a GPU card in a riser module

Upgrade and Repair Unit
(URU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶ If
applicable,"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the corresponding riser module, see
page 63.
214
212.
113.
46.
Upgrade and Maintenance Manual
104.
"Note on network settings
"After replacing or
Hardware: 5 minutes
Software: 5 minutes
81.
47.
48.
"Removing a riser module" on
45.
RX4770 M6