Table of Contents
Advertisement
▶ Remove the slot cover of the desired PCIe slot.
CAUTION
▶
Keep the slot cover for future use.
▶
If the expansion card is removed and not replaced with a new
one, the slot cover must be reinstalled due to cooling, to comply
with applicable EMC regulations and to protect against fire.
Figure 113: Installing the expansion card - example riser module left
▶ Carefully insert the expansion card into the PCIe slot and press down firmly
until it is fully seated in the slot.
Concluding steps
▶ Install the corresponding riser module, see
page
63.
▶
"Reassembling" on page
▶ Connect all external cables to the expansion card(s).
▶
"Connecting the power cord" on page
RX4770 M6
Expansion cards and backup units
53.
59.
Upgrade and Maintenance Manual
"Installing a riser module" on
209
Advertisement
Table of Contents
