Hard disk drive (HDD) / solid state disk (SSD)
Figure 74: Connecting cables to the SAS expander board
▶ Connect the following cables to the SAS expander board:
1 Power cable
2 Sideband cable
3 Signal cable (second HDD Backplane)
4 Signal cable (first HDD backplane)
5 Signal cable (raid card)
For the cable plan, see
▶ If applicable, install the front VGA, see
page
323.
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
164
"Appendix B" on page
"Replacing the front VGA" on
66.
53.
Upgrade and Maintenance Manual
419.
RX4770 M6