System board and components
Removing the iRMC microSD card
Figure 215: Removing the iRMC microSD card
▶ To eject the iRMC microSD card, gently push it in and then let go (1).
▶ Pull the iRMC microSD card straight out of its slot (2).
CAUTION
The iRMC microSD card contains customer information.
▶
After removing the iRMC microSD card, hand the card over to
the customer.
▶
If the customer requests disposal of the defective microSD card,
proceed as follows: Using a pair of side-cutting pliers, cut the
microSD card in half.
Concluding steps
▶
"Installing the OCP air duct" on page
▶
"Installing the top system board carrier" on page
▶
"Installing the air duct 1 (top system board)" on page
▶
"Installing the fan cage" on page
▶ Install the riser modules, see
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
348
73.
66.
"Installing a riser module" on page
53.
59.
60.
Upgrade and Maintenance Manual
76.
71.
63.
RX4770 M6