System board and components
▶ Remove all riser modules, see
▶
"Removing the air duct 1" on page
▶ Remove all memory modules, see
page
249.
Before removing the memory modules, take a note on the installation
slot number for each memory module. Ensure that you install the
memory modules again in the slot they were located before the
replacement.
CAUTION
In case of Optane PMem modules are not reinstalled in the right
slots, data can be lost!
▶ Remove all memory dummy modules, see
page
253.
▶
"Removing the top system board carrier" on page
374
"Removing a riser module" on page
68.
"Removing a memory module" on
Upgrade and Maintenance Manual
"Removing a dummy module" on
73.
63.
RX4770 M6