System board and components
▶ Install the power distribution board, see
distribution board" on page
▶ Connect the front panel cable from the bottom system board, see
the COP" on page
▶ If applicable, install the expansion cards from slot 3 to slot 9, see
the expansion card" on page
▶
"Installing the OCP air duct" on page
▶
"Installing the air duct 2 (bottom system board)" on page
▶
"Installing the top system board carrier" on page
▶
"Installing the air duct 1 (top system board)" on page
▶
"Installing the fan cage" on page
▶ Install all riser modules, see
▶
"Reassembling" on page
▶ Install all PSUs, see
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
You can find information on configuring the TPM in the corresponding
BIOS Setup Utility reference manual.
344
132.
320.
194.
66.
"Installing a riser module" on page
53.
"Installing a hot-plug PSU" on page
60.
Upgrade and Maintenance Manual
"Installing the new power
73.
76.
71.
59.
104.
"Installing
"Installing
72.
63.
124.
61.
RX4770 M6