Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual page 144

Hard disk drive (HDD) / solid state disk (SSD)
Figure 60: Installing the 2.5-inch HDD/SSD module
▶ Insert the HDD/SSD module into a drive bay and carefully push back as far
as it will go (1).
▶ Close the locking lever in the direction of the arrow until it engages (2).
▶ When using a RAID array, add the additional HDD/SSD to the RAID array.
Configuring the RAID array, see the documentation of the RAID
controller, used in your configuration, see
page 26.
Concluding steps
▶ If applicable,
"Installing the front cover with lock" on page
144 Upgrade and Maintenance Manual
"Documentation overview" on
61.
RX4770 M6