Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual page 10

Content
5.3.3 Updating expansion card firmware
5.3.4 Reconfiguring the backup software solution
5.3.5 Resetting the boot retry counter
5.3.6 Resetting the error status after replacing memory modules or
CPU
5.3.6.1 Resetting the error status after replacing CPUs
5.3.6.2 Resetting the error status after replacing memory modules
5.3.6.3 Locating the defective server
5.3.7 Enabling the boot watchdog
5.3.8 Enabling replaced components in the BIOS
5.3.9 Verifying the memory mode
5.3.10 Verifying the system time settings
5.3.11 Viewing and clearing the System Event Log (SEL)
5.3.12 Updating the NIC configuration file in a Linux and VMware
environment
5.3.13 Resuming BitLocker functionality
5.3.14 Performing a RAID array rebuild
5.3.15 Looking for MAC/WWN/GUID and SAS addresses
5.3.15.1 Basic information
5.3.15.2 Looking for the MAC address of a LAN controller
5.3.15.3 Looking for the WWN address of a fibre channel controller
5.3.15.4 Looking for the GUID address of an infiniband or Omni-Path
controller
5.3.15.5 Looking for SAS addresses of SAS controllers for external
devices
5.3.16 Using the Chassis ID Prom Tool
5.3.17 Configuring LAN teaming
5.3.18 Switching off the ID indicator
5.3.19 Performing a fan test
5.3.20 Updating the golden image
5.3.20.1 Updating the golden image for iRMC S5 firmware
5.3.20.2 Updating the golden image for BIOS firmware
6 Power supply unit (PSU)
6.1 Safety notes
6.2 Basic information
Upgrade and Maintenance Manual
89
91
91
93
93
95
97
98
99
99
100
101
104
104
105
106
106
107
108
109
109
110
112
113
114
115
115
117
119
119
119
RX4770 M6