Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual page 249

Removing a memory module
Figure 143: Removing memory modules (A)
▶ Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
Figure 144: Removing memory modules (B)
▶ Remove the ejected memory module.
▶ If applicable, install a dummy module, see
modules" on page
Concluding steps
For memory slots on the bottom system board:
▶
"Installing the air duct 2 (bottom system board)" on page
▶
"Installing the top system board carrier" on page
▶
"Installing the air duct 1 (top system board)" on page
▶
"Installing a riser module" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
RX4770 M6
253.
63.
53.
Upgrade and Maintenance Manual
"Handling memory dummy
76.
71.
59.
Main memory
72.
249