Table of Contents
Advertisement
▶
"Installing the air duct 2" on page
▶
"Installing the top system board carrier" on page
▶
"Installing the air duct 1 (top system board)" on page
▶
"Installing the fan cage" on page
▶ Install all riser modules, see
▶
"Reassembling" on page
▶ Install all PSUs, see
▶
"Connecting the power cord (AC PSU)" on page
▶ Connect all external cables.
▶
"Switching on the server" on page
When the system is powered on after a CPU has been replaced or
upgraded, the Global Error indicator will start flashing with the message
CPU has been changed.
This only indicates that the CPU configuration has been altered. There
is no technical problem.
Proceed as follows:
● Restart your server.
● As soon as the startup screen appears, press the [F2] function key to
enter the BIOS.
● If a password is assigned, enter the password and press [Enter].
● Select the Exit menu.
● Select Commit settings and Exit.
● Verify that the Global Error indicator stops flashing.
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Verifying the system time settings" on page
▶
"Updating or recovering the BIOS and iRMC S5" on page
▶
"Verifying system information backup or restore" on page
▶
"Looking for MAC/WWN/GUID and SAS addresses" on page
RX4770 M6
72.
66.
"Installing a riser module" on page
53.
"Installing a hot-plug PSU" on page
60.
Upgrade and Maintenance Manual
System board and components
76:
71.
123.
59.
61.
100.
85.
88.
63.
106.
385
Advertisement
Table of Contents
