Indicator On Hot-Plug Psu; Indicator Of The Hot-Plug System Fan - Fujitsu PRIMERGY RX4770 M6 Upgrade And Maintenance Manual

Appendix A
16.2.3.4

Indicator on hot-plug PSU

Figure 255: Indicator on hot-plug PSU
1 PSU status indicator
PSU status indicator (1)
Status
flashing green
green on
flashing orange
orange on
16.2.4

Indicator of the hot-plug system fan

A fan status indicator (LED on the system board) is assigned to each system
fan. The status indicators are not visible unless the housing is open.
414
Description
The server is switched off, but mains voltage is present
(standby mode).
The server is switched on and operating properly.
An overload has been detected. The PSU is still running,
but failure might be imminent.
A PSU failure has been detected.
Upgrade and Maintenance Manual RX4770 M6