Table of Contents
Advertisement
▶ Before removing the TPM board, remove the BitLocker protection and
decrypt the volume, see
volume" on page
▶ Disable the TPM in the system board BIOS, see
system board BIOS" on page
▶
"Suspending BitLocker functionality" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all PSUs, see
▶
"Getting access to the component" on page
▶ Remove all riser modules, see
▶
"Removing the fan cage" on page
▶
"Removing the air duct 1 (top system board)" on page
▶
"Removing the top system board carrier" on page
▶
"Removing the air duct 2 (bottom system board)" on page
▶
"Removing the OCP air duct" on page
▶ If applicable, remove the expansion cards from slot 3 to slot 9, see
"Removing the expansion card" on page
▶ Disconnect the front panel cable from the bottom system board, see
"Removing the COP" on page
▶ Remove the power distribution board, see
distribution board" on page
▶ If applicable, remove the OCP module, see
on page
191.
▶ Remove the bottom system board, see
system board" on page
RX4770 M6
"Removing BitLocker protection and decrypting the
338.
338.
"Removing a hot-plug PSU" on page
"Removing a riser module" on page
64.
317.
130.
381.
Upgrade and Maintenance Manual
System board and components
"Disabling the TPM in the
81.
46.
47.
48.
73.
70.
200.
"Removing the defective power
"Removing the OCP module"
"Removing the defective bottom
45.
126.
63.
68.
69.
337
Advertisement
Table of Contents
